Deco m9 plus v2 firmware update
How to Update the Firmware of Deco
An up-to-date firmware provides better and more stable network performance, so we highly recommend you always updating Deco to the latest firmware version.
Here are three ways to update the firmware.
Method 1: Update the firmware via the Deco app, which applies to all of the Deco models.
Step 1: Log into the Deco app and tap “More”, then click on “Update Deco”
Step 2: Here you can view your current firmware version if your firmware is the latest one, or you can see if any updates are available. If a new firmware is available, you can see the new firmware info.
(Take Deco P7 as an example)
Step 3: Tap “Download Firmware” to download the latest firmware.
Step 4: After the firmware is downloaded, click on “Install” to install the latest firmware.
After the firmware installed, the deco will reboot. Then you can see the deco is updated to the latest firmware.
If the firmware update fails, please reboot the main Deco, move the Satellite Deco closer to the main Deco, then try to update again.
Method 2: Update the firmware manually via the web UI, which applies to the Deco models that have the web management page.
Step 1: Go to the Download Center > click on your Deco’s model > select the hardware version of your Deco unit > click on Firmware, then you can download the latest firmware on your computer.
Step 2: Unzip the downloaded firmware and you will see a bin file.
Refer to the link to log into the web management page of your Deco. If you fail to log into the web page, please refer to the link to troubleshoot.
Step 3: On the web management page, click on Advanced > System > Firmware Upgrade, select your Deco’s model, then click on BROWSE to select the bin file, and then click on UPGRADE to update the firmware.
Note: Currently, some Deco models do not support the web management page, but don’t worry, they will support the web page via firmware updates in the future.
Method 3: Update the firmware via upgrade tool, which only applies to Deco M5 and Deco M9 Plus V2.
Here we take Deco M5 as an example.
Please refer to the link below to download the upgrade utility on your computer.
Then extract the file and run the update tool.
For the Deco M9 Plus V2, please refer to the link below.
Log in to Deco M5 Update Assistant with your TP-Link ID and password that you
used to set up the Deco M5 in the Deco app.
Ensure the computer is connected to the main Deco (either wired or wireless) and
all the Deco units are online. Then click on the Scan button.
After the Update Assistant found the Deco units, click on Next.
Click on Choose File, select the firmware of the Deco M5 in this folder (the bin file).
Click on Update.
Wait for about 5 minutes till Deco completes the update and reboot. The LED light
will finally turn to solid green, indicating that the upgrade has been done
Is this faq useful?
Your feedback helps improve this site.
Any other feedback?
How can we improve it?
We appreciate your feedback.
Click here to contact TP-Link technical support.
- Nice flower photos
- Honey to monk fruit conversion
- Alternator prices honda civic
- Glenstone hotel gatlinburg tn
Download for Deco M9 Plus V2
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
Deco M9 Plus(US)_V2_1.5.1_210126
|Published Date: 2021-02-19||Language: Multi-language||File Size: 21.14 MB|
Modifications and Bug Fixes:
|Published Date: 2021-02-03||Language: Multi-language||File Size: 21.01 MB|
Modifications and Bug Fixes:
Deco M9 Plus(US)_V2_200921
|Published Date: 2020-10-09||Language: English||File Size: 21.02 MB|
Modifications and Bug Fixes:
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
- TP-Link Deco
The Deco app allows you to quickly and easily install and manage your Deco Whole-Home Wi-Fi System.
In an era where digital trends rule, we always want ourselves to stay connected with the internet. Therefore, we use different WiFi routers to get access to fast internet. However, using the general WiFi routers, you might face several issues like dead zones, weak and fluctuating connections, etc. The all-new Smart Home Mesh WiFi system Deco M9 Plus can be your answer for the uninterrupted browsing session. You can banish all the dead zones at your home or your office. This unit of TP-Link WiFi hub comes with two units to place around your home for a smooth connection. Usually, this WiFi router can cover 4500 square foot which is more than enough for a general router.
The TP-Link Deco M9 Plus supports the 5GHz wireless channel and comes with eight antennas. The Orbi RBK50 also uses the 5GHz channel for the backhaul technology, but it only comes with a support of four 433Mbps spatial streams with very little bandwidth. Whereas the Deco M9 supports 867Mbps spatial streams for a bandwidth of 867Mbps. You can connect a myriad of devices with the Deco M9 Plus which makes it a WiFi hub instead of a router. It also supports ZigBee HA 1.2 that allows you to control different smart-home devices. The tri-band technology enables the router to connect with more devices as compared to the other routers available in the market.
Features Overview Of The Deco M9 Pluss
TP-Link has introduced numerous technologies in this Smart Home Mesh WiFi system. There are a lot of features available with this product, which is listed in the section below.
System Of Units
The Deco M9 Plus Smart-Home WiFi system comes with a system of units that allows you to achieve a seamless connection across your home. This technology also helps you to eliminate weak signal areas.
Advanced Deco Mesh Technology
Among the different technologies that have been used in this WiFi hub, the Advanced Deco Mesh without any doubt draws all the attention. With the help of this technology, different units of the Deco M9 plus consolidates the network with the same SSID. Whenever you move across your home, Deco automatically chooses which unit is the best for your device.
Wide Area Of Coverage
The Deco M9 Plus delivers WiFi to a wide area of up to 4500 square feet which is more than enough for your home. However, if you think that’s not enough, you can add more Deco units to the network. Adding more units to the Deco WiFi router can increase the overall coverage of the network.
Dynamic Backhaul Technology
You can achieve an incredibly fast speed up to 1.5Gbps with the Deco M9 plus. The Deco M9 plus uses the Dynamic Backhaul technology which ensures you have fast and stable connections throughout the entire coverage area.
Acts As Hub For Your Different Smart-Home Devices
Using the Deco app, Deco M9 Plus can act as a hub for your wireless and smart home devices. You only have to adjust settings and connect to your preferred device.
Lag-Free WiFi Connection
Deco M9 Plus can provide a lag-free WiFi connection for over 100 devices as it can handle traffic from the busiest of networks.
Anti-Virus Protection And Parental Control
The all-new deco M9 plus also comes with built-in protection from viruses from Trend Micro. It even comes with parental control feature. The parental control feature allows you to filter content and limit the time to prevent users from online surfing with your network.
Installation And Performance Of The Deco M9 Plus
You won’t find any kind of difficulties installing this router at your home. The setup procedure is so easy. Thanks to the well-designed app Deco, that helps you to step through the process of installing the router at your home. you can set up a multi-unit system using this Deco WiFi router. In order to do that, at first, you have to configure one unit of your router and then the following units will automatically configure them as the mesh nodes for the entire network.
After that, you need to choose a name for every node of the network from a location-based list by using the Deco app. However, you can also change it with some custom names. The Deco M9 Plus offers a unique and bold performance at every location of your home.
However, despite all these features, this router has some shortcomings too. So, before buying this router, go through both the pros and cons of the product in the section below. And judge whether this product serves your purpose or not.
- It comes with some added bandwidth due to its wireless backhaul on the fly technology.
- It also supports the backhaul technology that is associated with hardwiring.
- You can use it as a Smart WiFi hub for your home.
- It doesn’t support Z-wave.
- You can find other relatively fast routers without this in the market.
If you want a router that you can use as a hub, then you can use the Deco M9 plus. I would strongly recommend you to purchase this unit as it offers you different unique features that cannot be found in other WiFi routers. It offers better performance than its predecessor with full support for IoT devices.
Posted in TP-Link Router
Plus firmware m9 update deco
.TP-Link Deco M9 Plus Review: The Savior of Malaysian Home WiFi problems
- Water fight gif
- Incorporating a foundation
- Red robin daytona florida
- Maisto mustang
- Apple tv airpods and speakers
- 12 foot double gate
- Illidan returns
- Recher sound
- Menards boat covers
- Sherco oem parts
- Robot games shooting